Restoration Services in Draper

FIX Restoration handles water damage, fire and smoke damage, mold remediation, and reconstruction for homeowners and property managers throughout Draper. From the newer subdivisions climbing toward the Wasatch foothills to the established neighborhoods closer to the valley floor, the work here is specific to how Draper was built, how its soil drains, and how its climate behaves. Call (801) 930-9750 to reach the team directly.

Restoration emergencies common in Draper

Draper sits at the base of the Wasatch Front, and that geography drives most of the restoration calls the area generates. Spring snowmelt and rapid runoff from the foothills push water toward foundations faster than storm drains can handle it during heavy thaw events. Winter freeze-thaw cycles crack supply lines inside walls and attic spaces where insulation has compressed over the years. Summer thunderstorms, common along the Wasatch from July through September, can drop an inch of rain in under an hour, overwhelming window wells and below-grade entries in homes that were graded flat during the construction boom of the 1990s and 2000s.

Wildfire smoke is a seasonal reality in this part of Utah County. When fires burn in the Traverse Mountains or the canyons to the east, fine particulate and odor compounds infiltrate HVAC systems and settle into soft materials, requiring more than an air-out to resolve. Draper’s elevation and dry summer air also mean that a slow leak behind a finished basement wall can stay hidden for weeks before visible mold growth signals the problem.

Services we provide in Draper

Water damage restoration

Water damage in Draper frequently involves finished basements. The housing stock here leans heavily toward full-depth basements with drywall, carpet, and home-theater or office buildouts, which means a supply-line failure or sump pump backup can saturate a large square footage of finished space before it is noticed. Drying a finished basement correctly means reading moisture in the framing and concrete, not just the surface materials, and pulling vapor out of the slab before reinstalling flooring.

Mold remediation

Mold growth after a water event follows a predictable timeline: in Draper’s climate, conditions for colonization can develop within 24 to 48 hours in a space with limited airflow, such as a crawlspace, a closed utility room, or a basement bathroom. Remediation scopes here often include testing, physical removal of affected materials, and treatment of adjacent framing, followed by clearance verification before reconstruction begins.

Fire and smoke damage restoration

Kitchen fires are the most common ignition point in residential fire calls, but in Draper’s newer construction, synthetic materials in cabinetry and flooring produce a sticky, acidic residue that embeds in drywall and ductwork quickly. Smoke from wildfire events outside the home requires a different approach, focused on HVAC cleaning and odor neutralization rather than structural repair.

Reconstruction

When water, fire, or mold damage requires removing structural materials, reconstruction follows remediation. FIX Restoration coordinates both phases so property owners are not managing two separate contractors. In Draper, reconstruction scopes often involve drywall, insulation, flooring, and cabinetry in finished lower levels.

Coverage and how fast we can get there

FIX Restoration is headquartered in American Fork, which sits roughly 15 to 18 miles from central Draper via I-15. The drive runs north on I-15 to the Draper exits at 12300 South or Bangerter Highway, with typical travel time varying by traffic and time of day. Properties near the I-15 corridor are straightforward to reach; homes in the foothills east of Draper’s main grid, including areas climbing toward Traverse Mountain, add a few miles to the route. Call (801) 930-9750 to confirm scheduling and availability for your specific address.

Building stock, site conditions, and permits in Draper

Most of Draper’s residential housing was built between the mid-1980s and the late 2000s, with a second wave of construction continuing into the 2010s in the Traverse Mountain area. Homes from the earlier period commonly use copper supply lines and ABS drain lines, while construction from the 1990s may include polybutylene supply piping, a material known for brittleness and failure at fittings. Homes built before the mid-1980s may carry asbestos-containing materials in floor tile, joint compound, or insulation, which affects how demolition scopes are written.

Draper’s soils include clay-heavy layers that expand when saturated and drain slowly, which increases hydrostatic pressure against basement walls during wet cycles. The area is in a seismically active zone given its proximity to the Wasatch Fault, and structural repairs typically require permits through Draper City’s Building Services division. Reconstruction work that alters structural members, electrical systems, or plumbing will generally trigger a permit and inspection. Utah has adopted the International Building Code with state amendments, and Draper’s HOA prevalence means exterior reconstruction may also require HOA approval before work begins.

FIX Restoration is IICRC certified and has been operating in Utah since 2012. When you call, the team can walk you through what documentation your carrier will need and what the permit process looks like for your specific scope of work.

If you are dealing with water, fire, smoke, or mold damage at a Draper property, call (801) 930-9750. The sooner the assessment starts, the more of the structure can be saved.